Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
RAM Mount System for 10 inch iPads with Cases - Suction Cup Mount
This product ad may change over time
ShareRAM Mount System for 10 inch iPads with Cases - Suction Cup Mount
Made in the USA, and backed by a lifetime warranty, RAM mounting products are some of the best in the industry! Available in three mounting options (Yoke, Suction Cup, or Glare Shield) these mounting systems allow you to create a custom and secure set up within the cockpit. The RAM Mount System for 10 inch iPads has been specifi…
Made in the USA, and backed by a lifetime warranty, RAM mounting products are some of the best in the industry! Available in three mounting options (Yoke, Suction Cup, or Glare Shield) these mounting systems allow you to create a custom and secure set up within the cockpit. The RAM Mount System for 10 inch iPads has been specifically molded to accommodate the iPad, iPad 2, iPad 3 and iPad 4, iPad Air and HP Touchpad via the spring loaded Tab-Tite universal clamping cradle. These mounting systems are made of high strength composite and powder coated marine grade aluminum and are compatible with any RAM 1" ball "B" size components. Oh and don't forget, the double ball and socket system allows for both portrait and landscape viewing! This iPad cradle is compatible with iPads WITH or WITHOUT a thin case, skin or sleeve; within the cradle dimensions below: Height: 8.5" minimum to 10.75" maximum Width: Maximum to 7.75" Edge Depth: Maximum to 0.56" The Tab-Tite Cradle Series features: Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves Back plate can support various size support cups Spring loaded tension provides secure support for your tablet Spring loaded cradle allows for quick release of your tablet Full access to all ports Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Your kit will include everything needed to mount the iPad in one of these three configurations: Yoke Mount: Yoke clamp, 3" standard double socket arm, 10" iPad cradle (thin case, skin or sleeve) The RAM yoke clamp mount is designed with a RAM 1" diameter patented rubber "B" ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the yoke clamp mount to your optimum viewing position. The yoke mount accommodates rails from 0.625" to 1.25" in diameter. Suction Mount: 3.25" twist lock suction cup, 3" standard double socket arm, 10" iPad cradle (thin case, skin or sleeve) The RAM suction mount is designed with a RAM 1" diameter patented rubber "B" ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Simply attach the suction cup base to the windshield of your aircraft for an easy and safe way to view your iPad. High quality materials ensure your iPad is safe, secure, and within easy reach. RAM’s patented design also dampens shock and vibration helping to extend the life of your iPad. Glare Shield Mount: Glare Shield clamp, 3" standard double socket arm, 10" iPad cradle (thin case, skin or sleeve) The RAM glare shield mount is designed with a RAM 1" diameter patented rubber "B" ball and socket system with adjustment points at the base and cradle. Simply locate the clamp on any clamping surface up to 1.12" thick and gently snug the nylon thumb screws. The double ball & socket system will provide perfect viewing angles to get the most from your iPad. The RAM glare shield clamp with double ball & socket system is far and away the most discrete and clean way to mount most any compact electronic device to the glare shield of your aircraft. The glare shield mount accommodates flat surfaces from a minimum of 4.4mm (0.17") to a maximum 28.0mm (1.12"). ez-rollr ez-roller skin sleeve apple ipad2 ipad3 new ipad ipad4 RAM-B-166-TAB3U 793442931949
Description
Made in the USA, and backed by a lifetime warranty, RAM mounting products are some of the best in the industry! Available in three mounting options (Yoke, Suction Cup, or Glare Shield) these mounting systems allow you to create a custom and secure set up within the cockpit. The RAM Mount System for 10 inch iPads has been specifically molded to accommodate the iPad, iPad 2, iPad 3 and iPad 4, iPad Air and HP Touchpad via the spring loaded Tab-Tite universal clamping cradle. These mounting systems are made of high strength composite and powder coated marine grade aluminum and are compatible with any RAM 1" ball "B" size components. Oh and don't forget, the double ball and socket system allows for both portrait and landscape viewing! This iPad cradle is compatible with iPads WITH or WITHOUT a thin case, skin or sleeve; within the cradle dimensions below: Height: 8.5" minimum to 10.75" maximum Width: Maximum to 7.75" Edge Depth: Maximum to 0.56" The Tab-Tite Cradle Series features: Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves Back plate can support various size support cups Spring loaded tension provides secure support for your tablet Spring loaded cradle allows for quick release of your tablet Full access to all ports Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Your kit will include everything needed to mount the iPad in one of these three configurations: Yoke Mount: Yoke clamp, 3" standard double socket arm, 10" iPad cradle (thin case, skin or sleeve) The RAM yoke clamp mount is designed with a RAM 1" diameter patented rubber "B" ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the yoke clamp mount to your optimum viewing position. The yoke mount accommodates rails from 0.625" to 1.25" in diameter. Suction Mount: 3.25" twist lock suction cup, 3" standard double socket arm, 10" iPad cradle (thin case, skin or sleeve) The RAM suction mount is designed with a RAM 1" diameter patented rubber "B" ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Simply attach the suction cup base to the windshield of your aircraft for an easy and safe way to view your iPad. High quality materials ensure your iPad is safe, secure, and within easy reach. RAM’s patented design also dampens shock and vibration helping to extend the life of your iPad. Glare Shield Mount: Glare Shield clamp, 3" standard double socket arm, 10" iPad cradle (thin case, skin or sleeve) The RAM glare shield mount is designed with a RAM 1" diameter patented rubber "B" ball and socket system with adjustment points at the base and cradle. Simply locate the clamp on any clamping surface up to 1.12" thick and gently snug the nylon thumb screws. The double ball & socket system will provide perfect viewing angles to get the most from your iPad. The RAM glare shield clamp with double ball & socket system is far and away the most discrete and clean way to mount most any compact electronic device to the glare shield of your aircraft. The glare shield mount accommodates flat surfaces from a minimum of 4.4mm (0.17") to a maximum 28.0mm (1.12"). ez-rollr ez-roller skin sleeve apple ipad2 ipad3 new ipad ipad4 RAM-B-166-TAB3U 793442931949