Related products you may like

Ads
$889.97
$899.97
$999.99
(11% off)
Product Image

Share this product

Save $10.00 with WK582D10 coupon on Eastwood 250 Amp MIG Welder
This product ad may change over time
Share ProductShare

Eastwood 250 Amp MIG Welder

MIG Welding from Eastwood Get the power you need for big welding jobs at a remarkably low price tha…
MIG Welding from Eastwood Get the power you need for big welding jobs at a remarkably low price thanks to the Eastwood MIG 250. This is our most advanced MIG welder that can be used on 20-gauge sheet metal up to -inch steel plates. The infinitely adjustable knob allows you to set the amperage anywhere between 50 and 250 amps for greater control. Even at the highest setting, you can weld for up to six minutes before needing a break. State-of-the-art inverter technology means this portable Eastwood MIG welder clocks in at just 46 poundshalf that of similar welders from leading brands. Each MIG 250 welder comes with a Trafimet ERGOPLUS24 torch and 8-foot cable and 9.5-foot ground cable to help you move around a project. It takes 4-inch or 8-inch spool wire, and with the optional MIG welder spool gun, you can also weld aluminum. Plug this Eastwood welder into any 120V or 240V North American power source to Do the Job Right on automotive restoration. We back our MIG welders with a 3-year manufacturers warranty and lifetime tech support. If you also need the ability to TIG or Arc weld in a single machine, you may want to consider our powerful Multi-Process MP250i Welder. The Eastwood MIG 250 Features:Welds 20 gauge steel up to -inch thick plate 120 or 240 volt powered Infinitely adjustable 50-250 amp welding range 60 percent duty cycle at full 250 amp setting Weighs just 46 lbs. Torch Cable Length: 8 feet Ground Cable Length: 9.5 feet State of the art inverter technology Uses 4-inch or 8-inch wire spool Optional spool gun for aluminum wire Trafimet ERGOPLUS24 Torch 3-year manufacturer's warrantyPortability from Your Eastwood Welder This 250-amp MIG welder is one of the most powerful portable machines on the market today. It has the ability to run on 120v or 240v, so you can plug it into nearly any existing circuitry in your garage or shop. This also means you can easily take it to the race track or job site and run it off a generator. On 120v power, you can use up to 140 amps, which is enough for most small and midsize jobs. The efficiency of the inverter means you'll still get great welds even on lower voltages or amp settings. It also can take both 4-inch and 8-inch diameter spools and feed steel or stainless steel wire from 0.023-inch to 0.045-inch. Flux core wire for outdoor welding can be between 0.030 and 0.045 inches in diameter while aluminum wire is limited to 0.030-0.035 inches. A unique wire spool mount is configured to hold either 2-pound or 10-pound spools of wire. Everything You Need for MIG Welding This lightweight unit ships to your door via FedEx or UPS, eliminating costly truck shipping freight fees. It comes with a Trafimet ERGOPLUS24 8-foot MIG torch and ground clamp, a shielding gas regulator and hose, extra contact tips, an 8-inch wire spool adapter, a roll of 0.030-inch steel MIG wire and other MIG 250 welding supplies for your shop. The only thing you need to add is a canister of shielding gas.
See more
$889.97
$899.97
$999.99
(11% off)
Coupon
$10.00 off with WK582D10
Copy
Copied!

Something went wrong. Please try again later.

Tracking price
Receive notifications on Edge browser if the price drops
Price tracking canceled
We removed this from your Edge tracking
Something went wrong. Please try again later.
Track price
Visit Eastwood.com
Good deal?

More related products

Ads
  • Description

    MIG Welding from Eastwood Get the power you need for big welding jobs at a remarkably low price thanks to the Eastwood MIG 250. This is our most advanced MIG welder that can be used on 20-gauge sheet metal up to -inch steel plates. The infinitely adjustable knob allows you to set the amperage anywhere between 50 and 250 amps for greater control. Even at the highest setting, you can weld for up to six minutes before needing a break. State-of-the-art inverter technology means this portable Eastwood MIG welder clocks in at just 46 poundshalf that of similar welders from leading brands. Each MIG 250 welder comes with a Trafimet ERGOPLUS24 torch and 8-foot cable and 9.5-foot ground cable to help you move around a project. It takes 4-inch or 8-inch spool wire, and with the optional MIG welder spool gun, you can also weld aluminum. Plug this Eastwood welder into any 120V or 240V North American power source to Do the Job Right on automotive restoration. We back our MIG welders with a 3-year manufacturers warranty and lifetime tech support. If you also need the ability to TIG or Arc weld in a single machine, you may want to consider our powerful Multi-Process MP250i Welder. The Eastwood MIG 250 Features:Welds 20 gauge steel up to -inch thick plate 120 or 240 volt powered Infinitely adjustable 50-250 amp welding range 60 percent duty cycle at full 250 amp setting Weighs just 46 lbs. Torch Cable Length: 8 feet Ground Cable Length: 9.5 feet State of the art inverter technology Uses 4-inch or 8-inch wire spool Optional spool gun for aluminum wire Trafimet ERGOPLUS24 Torch 3-year manufacturer's warrantyPortability from Your Eastwood Welder This 250-amp MIG welder is one of the most powerful portable machines on the market today. It has the ability to run on 120v or 240v, so you can plug it into nearly any existing circuitry in your garage or shop. This also means you can easily take it to the race track or job site and run it off a generator. On 120v power, you can use up to 140 amps, which is enough for most small and midsize jobs. The efficiency of the inverter means you'll still get great welds even on lower voltages or amp settings. It also can take both 4-inch and 8-inch diameter spools and feed steel or stainless steel wire from 0.023-inch to 0.045-inch. Flux core wire for outdoor welding can be between 0.030 and 0.045 inches in diameter while aluminum wire is limited to 0.030-0.035 inches. A unique wire spool mount is configured to hold either 2-pound or 10-pound spools of wire. Everything You Need for MIG Welding This lightweight unit ships to your door via FedEx or UPS, eliminating costly truck shipping freight fees. It comes with a Trafimet ERGOPLUS24 8-foot MIG torch and ground clamp, a shielding gas regulator and hose, extra contact tips, an 8-inch wire spool adapter, a roll of 0.030-inch steel MIG wire and other MIG 250 welding supplies for your shop. The only thing you need to add is a canister of shielding gas.

    Price History

    Something went wrong. Please try again later.

  • Product added to your wishlist! View wishlist
    Sign in to see your saved products on any device
    Product removed from your wishlist! View wishlist
    Sign in to see your saved products on any device
    Something went wrong. Please try again later.
    Product is added to compare already. Please refresh the page.
    Product is not found in compare. Please refresh the page.
    5 Products already added. Please delete existing selection to add this.