Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
MIRACLE 511 Impregnator Sealer, Quart
This product ad may change over time
Share
Description
Miracle Sealants 511 Impregnator,1 Quart, is a penetrating sealer that protects natural stone surfaces with medium to dense porosity. This penetrating sealer creates a protective coating that combats moisture and stains, does not alter the appearance of the stone, and allows vapor release from the stone tiles making it a good solution for use in indoor showers and restrooms, and on outdoor patios. 511 Impregnator leave the surface protected and with a natural appearance. Miracle 511 Impregnator Sealer creates a water, stain and slip resistant sealed surface. Interior and Exterior applications. Use Impregnator penetrating sealer on concrete, quarry tile, ceramic tile, porcelain tile, marble, granite, travertine, slate, quartz, brick, terrazzo and grout . Coverage ranges from 125 to 1,000 square feet per quart depending upon the type of surface to which it is applied. Cure Time: Will be dry to the touch in 1 - 3 hours and may be used for normal foot traffic. For optimum results the area should be kept dry and free from staining materials for 72 hours. UV transparent Maintains natural sheen Resists acid rain Will not yellow Slip-resistant Downloads: Miracle 511 Impregnator Sealer Product Information Sheet Miracle 511 Impregnator Sealer Safety Data Sheet ORM-D: FLAMMABLE LIQUID, Class 3, Paint & related products. All safety information for this item is detailed on the product Safety Data Sheet. Directions For Use: Read entire label as well as technical and safety data sheets, before using. DO NOT DILUTE. Use as is, direct from approved container. Test prior to full use. New Installations: Before Grouting: Apply 511 Impregnator to all surfaces prior to grouting. This allows for quick and easy cleanup after grouting. (Grout can stain many surfaces if this procedure is not used prior to the grouting process.) Apply 511 Impregnator using a Mira Brush or a clean towel. Apply enough to wet the surface. Be careful not to saturate the open grout joints. Allow 511 Impregnator to stand for approximately 3 - 5 minutes for maximum penetration. All excess must be removed at this time by buffing surface with a clean dry towel. This is very important on polished, glazed and porcelain surfaces. Allow to cure for 6 - 12 hours before continuing with the grouting procedure. After Grouting: Once grouted, make sure that all grout residue is removed from the surface with a clean sponge and water. Allow grout to cure per grout manufacturer's specification. If grout clean up is not performed effectively, an additional cleaning may be necessary to remove remaining grout residue or haze. For this procedure use Phosphoric Acid Cleaner, Heavy Duty Acidic Cleaner or Epoxy Grout Film Remover following the instructions carefully. Once the area has completely dried, proceed with the sealing of the grout for water and stain resistance. Apply 511 Impregnator to all grout with a paint brush. Any excess sealer that gets on the surface should be wiped off with a clean towel before it dries. On larger jobs grout can be sealed by retreating the entire area including the tile or stone surface a second time. Be careful not to allow the sealer to puddle or dry on presealed surfaces. Existing Installations: Existing Installation Surface Preparation: Surface must be dry and free of contaminants, including previously applied sealers, dirt, lime & hard water deposits, efflorescence, rust & other heavy dirt and grime. Surface Coating/Wax Removal: To remove existing coatings and/or waxes, use Mira Strip or Finish Sealer Stripper as directed. Heavy Duty Cleaning: To remove lime and hard water deposits, efflorescence, rust, grease and other heavy dirt and grime use Heavy Duty Acidic Cleaner or Phosphoric Acid Cleaner as directed. For a non acid deep clean use Liquid Poultice as directed. Light Cleaning: Use Tile & Stone Cleaner , Porcelain & Ceramic Tile Cleaner, Limestone/Travertine Soap, Counter Kleen as directed. Existing Installation Application Instructions: Follow the application instructions previously mentioned, except now, seal the grout and tile or stone surfaces at the same time. When treating surfaces together, make sure that the recessed grout is saturated. Residue Removal: To remove accumulated 511 Impregnator residue, use Miracle Residue Remover as directed. For questions concerning grout, refer to the grout manufacturer's specifications. 511 Impregnator will not stop acid etching. Due to the differences of each substrate, several inconspicuous test patches should be completed to assure maximum performance. User must determine suitability of the product for their intended use. 511 Impregnator has been used successfully for compliance with the American Disability Act's recommendations for slip resistance (ASTM C 1028-89) on polished & honed surfaces. Also available in pint size Miracle Sealants 511 Impregnator Sealer . Protect neighboring surfaces including wood, carpet, metal, landscaping and other non masonry surfaces. To achieve color and gloss enhancement, use Mira Matte or High-Gloss Finish Sealer. On more porous surfaces use 511 Porous Plus.
Buying Options
✕Microsoft may receive compensation for clicks on these products, but such compensation has no effect on the ranking or relevance of results
Specifications
| Dimensions | 5.75 X 15 X 8 Inches |
| Package Includes | Penetrating Sealers |
| Design | Sealer |
| Water Resistance | Water Resistant |
| Item Package Quantity | 1 |
| Thickness | 1 Inches |
| Espesor | 1 Pulgadas |
| Item Weight | 1.75 Pounds |
| Item Dimensions Lxwxh | 5.2 X 5.2 X 2.3 Inches |
| Color | Clear |
| Item Form | Liquid |
| Date First Available | May 17, 2011 |
| Batteries Included | No |
| Material Compatible | Piedra |
| Part Number | Plusqt6 |
| Estilo | Sellador |
| Componentes Incluidos | Selladores Penetrantes |
| Compatible Material | Terracotta, Stone |
| Country Of Origin | Usa |
| Water Resistance Level | Water Resistant |
| Is Stain Resistant | Yes |