Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
Aiyima T3 HiFi Tube MM Phono Preamp for Turntable MM Phonograph Stereo Audio Tube Preamplifier
This product ad may change over time
ShareAiyima T3 HiFi Tube MM Phono Preamp for Turntable MM Phonograph Stereo Audio Tube Preamplifier
Product details Two input ways: MM signal input and 3.5mm AUX input(with priority) Output level:600mV @3mV 1KHz Signal to noise ratio 98dB Working voltage DC12V 2A Three switchable gain modeS 39, 42, 45 dB Adjustable Frequency response RIAA compliant Distortion 0.1% Dimensions 118.5*98*33MM (without protruding knobs and termina…
Product details Two input ways: MM signal input and 3.5mm AUX input(with priority) Output level:600mV @3mV 1KHz Signal to noise ratio 98dB Working voltage DC12V 2A Three switchable gain modeS 39, 42, 45 dB Adjustable Frequency response RIAA compliant Distortion 0.1% Dimensions 118.5*98*33MM (without protruding knobs and terminals) Weight 450 g/0.99 Ib Package included: 1Pcs T3 + 1Pcs DC12V supply power(US) Operation Steps: 1. The gear switch is in the OFF state. 2. Insert the supplied tube into the tube holder in the direction (the tube does not matter, check whether the lower pin is deformed before installing the tube, and the deformation can be reversed by hand). 3. Connect the sing-out output cable to the audio input connector. 4. Connect the rear-end device that needs an external connection to the audio output connector. 5. Connect the DC12V power supply. 6. Rotate the gear switch to select the desired gain gear. 7. When the preamp input is input, the phono input will automatically switch to the preamp input. 8.Input interface(can be connected to CD, DAC decoder, mobile phone, TV, etc.) 9.Audio output interface(such as amplifier, amp, active speaker, etc., red to the right channel, white left channel) Warning: 1. Do not open the case privately. Improper handling may result in electric shock. 2. Please use the switching power supply of the regular manufacturer, otherwise the risk of damage to the machine will be damaged. 3. Do not place the machine in a high temperature and high humidity environment. 4. Please disconnect the input and output cables before powering off, otherwise the impact sound may damage your speakers. 5. Do not replace the tube type that does not match, otherwise it will burn your tube and machine.
Description
Product details Two input ways: MM signal input and 3.5mm AUX input(with priority) Output level:600mV @3mV 1KHz Signal to noise ratio 98dB Working voltage DC12V 2A Three switchable gain modeS 39, 42, 45 dB Adjustable Frequency response RIAA compliant Distortion 0.1% Dimensions 118.5*98*33MM (without protruding knobs and terminals) Weight 450 g/0.99 Ib Package included: 1Pcs T3 + 1Pcs DC12V supply power(US) Operation Steps: 1. The gear switch is in the OFF state. 2. Insert the supplied tube into the tube holder in the direction (the tube does not matter, check whether the lower pin is deformed before installing the tube, and the deformation can be reversed by hand). 3. Connect the sing-out output cable to the audio input connector. 4. Connect the rear-end device that needs an external connection to the audio output connector. 5. Connect the DC12V power supply. 6. Rotate the gear switch to select the desired gain gear. 7. When the preamp input is input, the phono input will automatically switch to the preamp input. 8.Input interface(can be connected to CD, DAC decoder, mobile phone, TV, etc.) 9.Audio output interface(such as amplifier, amp, active speaker, etc., red to the right channel, white left channel) Warning: 1. Do not open the case privately. Improper handling may result in electric shock. 2. Please use the switching power supply of the regular manufacturer, otherwise the risk of damage to the machine will be damaged. 3. Do not place the machine in a high temperature and high humidity environment. 4. Please disconnect the input and output cables before powering off, otherwise the impact sound may damage your speakers. 5. Do not replace the tube type that does not match, otherwise it will burn your tube and machine.